MILSEK CO -- FURNITURE POLISH & CLEANER  -- 7930-00N075244
<pre>=====================  Product Identification  =====================

Product ID:FURNITURE POLISH & CLEANER
MSDS Date:02/01/1995
FSC:7930
NIIN:00N075244
=== Responsible Party ===
Company Name:MILSEK CO
Address:5629 PINE LAKE RD
City:PETERSBURG
State:OH
ZIP:44454
Country:US
Info Phone Num:216-542-2700
Emergency Phone Num:216-542-2700
CAGE:MXSLE
=== Contractor Identification ===
Company Name:MILSEK CO
Address:5629 PINE LAKE RD
Box:City:PETERSBURG
State:OH
ZIP:44454
Country:US
Phone:216-542-2700
CAGE:MXSLE

=============  Composition/Information on Ingredients  =============

Ingred Name:STODDARD SOLVENT; (PETROLEUM HYDROCARBON/ALIPHATIC
    PETROLEUM DISTILLATES)
CAS:8052-41-3
RTECS #:WJ8925000
OSHA PEL:500 PPM
ACGIH TLV:100 PPM

=====================  Hazards Identification  =====================

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES  Skin:YES  Ingestion:YES
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:ACUTE: SKIN: POSSIBLE IRRITATION.
    PROLONGED OR REPEATED CONTACT MAY CAUSE DRYING, DEFATTING AND
    DERMATITIS. EYES: REDNESS, PAIN; IRRITATION. INGESTION: SORE
    THROAT, ABDOMINAL PAIN, NAUSEA, HEADACHE, D IZZINESS, DROWSINESS.
    INHALATION: IRRITATION OF NOSE AND THROAT; HEADACHE.
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

=======================  First Aid Measures  =======================

First Aid:SKIN:REMOVE CONTAMD CLOTHING & WASH THOROUGHLY WITH SOAP &
    WATER. EYES:FLUSH IMMEDIATELY WITH WATER FOR AT LEAST 15 MINUTES &
    CONSULT PHYSICIAN. INGEST:SEEK MED ATTN. DO NOT INDUCE VOMIT.
    ASPIRATIONS  OF MATL INTO LUNGS DUE TO VOMIT CAN CAUSE CHEM PNEUM
    WHICH CAN BE FATAL. IF BREATHING IS DIFFICULT, ADMINISTER OXYGEN.
    INHAL:MOVE PERSON TO FRESH AIR AND CONSULT PHYSICIAN.

=====================  Fire Fighting Measures  =====================

Flash Point Method:CC
Flash Point:141F,61C
Lower Limits:0.8%
Upper Limits:5.0%
Extinguishing Media:FOAM, CO*2, DRY, CHEMICAL, WATER SPRAY OR CARBON
    DIOXIDE.
Fire Fighting Procedures:USE NIOSH APPROVED SCBA & FULL PROTECTIVE
    EQUIPMENT . DO NOT USE WATER IN STREAM. CLOSED CONTAINERS MAY BUILD
    UP PRESSURE AT ELEVATED TEMPERATURES.
Unusual Fire/Explosion Hazard:COMBUSTIBLE AT HIGH TEMPERATURES.
    IRRITATING OR TOXIC SUBSTANCES MAY BE EMITTED UPON THERMAL
    DECOMPOSITION.

==================  Accidental Release Measures  ==================

Spill Release Procedures:VENTILATE AREA, ABSORB SPILL ON NON-FLAMMABLE
    ABSORBENT MATERIAL (I.E. POROUS CLAY). GUARD AGAINST IGNITION.
    AVOID BREATHING VAPORS.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

======================	Handling and Storage  ======================

Handling and Storage Precautions:KEEP AWAY FROM HEAT, SPARK AND OPEN
    FLAME. AVOID SKIN AND EYE CONTACT. WASH THOROUGHLY AFTER HANDLING.
Other Precautions:AVOID PROLONGED OR REPEATED BREATHING OF CONCENTRATED
    VAPORS. STORE IN COOL, DRY WELL VENTILATED AREA. CONTAINERS OF THIS
    MATERIAL MAY BE HAZARDOUS WHEN EMPTIED SINCE EMPTIED CONTAINERS
    RETAIN PRODUCT  RESIDUE (VAPOR/LIQUID).

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:RESPIRATORY PROTECTION IS NOT NORMALLY REQUIRED
    IN WELL VENTILATED AREA. MAY USE NIOSH APPROVED RESPIRATOR IN
    CONFINED AREA.
Ventilation:LOCAL EXHAUST:PREFERABLE. MECHANICAL:ACCEPTABLE. VENTILTION
    MEETING ACGHI STANDARDS.
Protective Gloves:IMPERVIOUS GLOVES.
Eye Protection:ANSI APPRVD CHEM WORKERS GOGGLES .
Other Protective Equipment:IMPERVIOUS BOOTS AND BODY APRON RECOMMENDED.
    ANSI APPRVD EYE WASH & DELUGE SHOWER .
Work Hygienic Practices:ADHERE TO GENERAL GOOD MANUFACTURING PRACTICES.
Supplemental Safety and Health
EVAP RATE:1000 X SLOWER (ETHYL ETHER =1).

==================  Physical/Chemical Properties  ==================

Boiling Pt:B.P. Text:300F,149C
Vapor Pres:2 @ 20C
Vapor Density:4.9
Spec Gravity:0.770 (H*20=1)
Evaporation Rate &amp; Reference:SUPP DATA
Solubility in Water:INSOLUBLE
Appearance and Odor:LEMON/YELLOWISH COLOR WITH BANANA-LIKE ODOR.

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZERS.
Stability Condition to Avoid:NOT APPLICABLE.
Hazardous Decomposition Products:CARBON MONOXIDE AND ASPHYXIANTS.

====================  Disposal Considerations  ====================

Waste Disposal Methods:DO NOT FLUSH TO DRAIN/STORM SEWER. CHEMICAL
    INCINERATOR OR APPROVED LANDFILL. OBSERVE LOCAL, STATE AND FEDERAL
    REGULATIONS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.